top of page

HMTO Group

عام·33 عضوًا
Valentine Costin
Valentine Costin

PSPaudioware PSP Vintage Warmer 2: Tips and Tricks for Getting the Most Out of This Plugin That Can Handle Different Types of Audio Sources with Ease and Deliver Satisfying Results with Minimal Tweaking


PSPaudioware PSP Vintage Warmer 2 Review: A High-Quality Digital Simulation of an Analog-Style Compressor/Limiter




If you are looking for a plugin that can add warmth, punch, and glue to your mixes, you might want to check out PSPaudioware PSP Vintage Warmer 2. This is a high-quality digital simulation of an analog-style single or multi-band compressor/limiter that combines rich, warm analog processing with a straightforward user interface and a comprehensive library of presets. In this article, we will review PSPaudioware PSP Vintage Warmer 2 in detail and see what it can do for your audio production.




PSPaudioware PSP Vintage Warmer 2 VST RTAS v2.5.0 x86 x64 Incl Keygen-ASSiGN



Introduction




PSPaudioware PSP Vintage Warmer 2 is a plugin that emulates the sound and behavior of classic analog compressors and limiters, such as the legendary Fairchild 670, UREI 1176, or Teletronix LA-2A. It can be used for both soft-knee compression and brick-wall limiting, making it an essential tool for mixing and mastering engineers. It also features a unique FAT mode that uses double sampling to achieve more accurate analog sounding processing.


Some of the main features and benefits of PSPaudioware PSP Vintage Warmer 2 are:



  • High quality signal processing algorithms that preserve the natural dynamics and harmonics of the audio source.



  • Single or multi-band signal processing that allows you to control the bass and treble components separately.



  • Shelf filters for bass and treble frequencies in single-band mode that can be used to enhance or reduce the low-end and high-end of the signal.



  • Variable high frequency limiter that can be used to prevent clipping and distortion caused by excessive high frequencies.



  • Adjustable release time that can be set to auto or manual mode, depending on the type and tempo of the audio material.



  • Input and output gain controls that can be used to adjust the level of the signal before and after processing.



  • Input and output VU meters that can be switched between peak or RMS mode, and between input or output level display.



  • Over 70 presets that cover a wide range of applications, such as drums, vocals, guitars, synths, bass, master bus, etc.



  • Low CPU usage and low latency processing that make it suitable for both offline and real-time applications.



  • Support for VST, RTAS, AAX, and AU plugin formats on Windows and Mac OS X platforms.



To download and install PSPaudioware PSP Vintage Warmer 2 with Keygen-ASSiGN, you need to follow these steps:



  • Download the plugin installer from the official website of PSPaudioware or from any other trusted source.



  • Run the installer and follow the instructions on the screen to complete the installation process.



  • Run the Keygen-ASSiGN application and generate a serial number for PSPaudioware PSP Vintage Warmer 2.



  • Launch your DAW and load PSPaudioware PSP Vintage Warmer 2 as a plugin on any audio track or bus.



  • Enter the serial number generated by Keygen-ASSiGN when prompted by the plugin to activate it.



  • Enjoy using PSPaudioware PSP Vintage Warmer 2 for your audio production needs.



User Interface and Controls




The user interface of PSPaudioware PSP Vintage Warmer 2 is simple and intuitive, consisting of a main panel with several knobs, buttons, and meters. Here is a brief overview of the functions and parameters of each control:



ControlFunctionParameter


FATThis button enables or disables the FAT mode, which uses double sampling to achieve more accurate analog sounding processing. When enabled, the button lights up in yellow and the CPU usage increases slightly.On/Off


MULTIThis button switches between single-band and multi-band modes. In single-band mode, the plugin processes the entire frequency spectrum of the signal with one set of controls. In multi-band mode, the plugin splits the signal into two bands (bass and treble) and processes them separately with two sets of controls. When enabled, the button lights up in green and two additional knobs (BASS FREQ and TREBLE FREQ) appear on the interface.On/Off


LIMITThis button switches between soft-knee compression and brick-wall limiting. In soft-knee compression mode, the plugin applies a smooth curve to the signal when it reaches the threshold level, resulting in a more natural sounding compression. In brick-wall limiting mode, the plugin applies a hard clip to the signal when it reaches the threshold level, resulting in a more aggressive sounding limiting. When enabled, the button lights up in red and a new knob (HF LIMIT) appears on the interface.On/Off


SPEEDThis knob adjusts the release time of the compressor/limiter. It can be set to auto or manual mode. In auto mode, the release time is automatically adjusted according to the type and tempo of the audio material. In manual mode, the release time can be set from 0.01 to 4 seconds. The knob also displays the current release time value in milliseconds.Auto/0.01-4s


KNEEThis knob adjusts the shape of the compression curve. It can be set from 0 to 100%. At 0%, the curve is linear, resulting in a hard compression. At 100%, the curve is logarithmic, resulting in a soft compression. The knob also displays the current knee value in dB.0-100%


HIGH FREQ LIMIT (HF LIMIT)This knob adjusts the amount of high frequency limiting applied to the signal. It can be set from 0 to 100%. At 0%, no high frequency limiting is applied, resulting in a brighter and more transparent sound. At 100%, the high frequencies are severely limited, resulting in a darker and more saturated sound. The knob also displays the current high frequency limit value in dB.0-100%


DRIVEThis knob adjusts the amount of saturation and distortion applied to the signal. It can be set from 0 to 100%. At 0%, no saturation or distortion is applied, resulting in a clean and uncolored sound. At 100%, the signal is heavily saturated and distorted, resulting in a dirty and gritty sound. The knob also displays the current drive value in dB.0-100%


CEILINGThis knob adjusts the output level of the plugin. It can be set from -20 to 0 dB. It acts as a final limiter that prevents the output signal from exceeding the ceiling level. The knob also displays the current ceiling value in dB.-20-0dB


MIXThis knob adjusts the balance between the dry (unprocessed) and wet (processed) signals. It can be set from 0 to 100%. At 0%, only the dry signal is heard, resulting in no effect. At 100%, only the wet signal is heard, resulting in full effect. The knob also displays the current mix value in %.0-100%


BASS FREQThis knob adjusts the crossover frequency between the bass and treble bands in multi-band mode. It can be set from 20 to 500 Hz. It determines the frequency range of the bass band that is processed by the lower set of controls. The knob also displays the current bass frequency value in Hz.20-500Hz


TREBLE FREQThis knob adjusts the crossover frequency between the treble and bass bands in multi-band mode. It can be set from 1 to 20 kHz. It determines the frequency range of the treble band that is processed by the upper set of controls. The knob also displays the current treble frequency value in Hz.1-20kHz


BASS/TREBLE DRIVEThese knobs adjust the amount of saturation and distortion applied to the bass and treble bands separately in multi-band mode. They can be set from 0 to 100%. At 0%, no saturation or distortion is applied, resulting in a clean and uncolored sound. At 100%, the signal is heavily saturated and distorted, resulting in a dirty and gritty sound. The knobs also display the current drive values in dB.0-100%


BASS/TREBLE KNEEThese knobs adjust the shape of the compression curve for the bass and treble bands separately in multi-band mode. They can be set from 0 to 100%. At 0%, the curve is linear, resulting in a hard compression. At 100%, the curve is logarithmic, resulting in a soft compression. The knobs also display the current knee values in dB.0-100%


BASS/TREBLE SPEEDThese knobs adjust the release time of the compressor/limiter for the bass and treble bands separately in multi-band mode. They can be set to auto or manual mode. In auto mode, the release time is automatically adjusted according to the type and tempo of the audio material. In manual mode, the release time can be set from 0.01 to 4 seconds. The knobs also display the current release time values in milliseconds.Auto/0.01-4s


BASS/TREBLE CEILINGThese knobs adjust the output level of the bass and treble bands separately in multi-band mode. They can be set from -20 to 0 dB. They act as final limiters that prevent the output signal from exceeding the ceiling level. The knobs also display the current ceiling values in dB.-20-0dB


BASS/TREBLE MIXThese knobs adjust the balance between the dry (unprocessed) and wet (processed) signals for the bass and treble bands separately in multi-band mode. They can be set from 0 to 100%. At 0%, only the dry signal is heard, resulting in no effect. At 100%, only the wet signal is heard, resulting in full effect. The knobs also display the current mix values in %.0-100%


BASS/TREBLE SHELFThese buttons enable or disable the shelf filters for the bass and treble bands separately in single-band mode. When enabled, the buttons light up in blue and two additional knobs (BASS BOOST/CUT and TREBLE BOOST/CUT) appear on the interface.On/Off


BASS/TREBLE BOOST/CUTThese knobs adjust the amount of boost or cut applied to the bass and treble frequencies in single-band mode. They can be set from -12 to +12 dB. They act as shelf filters that can be used to enhance or reduce the low-end and high-end of the signal. The knobs also display the current boost/cut values in dB.-12-+12dB


INPUT/OUTPUT METERThese meters display the input or output level of the signal in peak or RMS mode. They can be switched by clicking on them. The meters also show the amount of gain reduction applied by the compressor/limiter in red.Peak/RMS


PRESETSThis button opens a drop-down menu that allows you to access the presets library, save your own settings, or load a previously saved setting. The presets library contains over 70 presets that cover a wide range of applications, such as drums, vocals, guitars, synths, bass, master bus, etc.Menu


Sound Quality and Performance




The sound quality of PSPaudioware PSP Vintage Warmer 2 is impressive and versatile, as it can handle different types of audio sources with ease and flexibility. Whether you want to add some subtle warmth and punch to your drums, smooth out and enhance your vocals, saturate and distort your guitars, or glue together your master bus, PSPaudioware PSP Vintage Warmer 2 can deliver satisfying results with minimal tweaking.


The plugin can also emulate the sound and behavior of classic analog compressors and limiters, such as the legendary Fairchild 670, UREI 1176, or Teletronix LA-2A. By adjusting the drive, knee, speed, and ceiling parameters, you can achieve different types of compression characteristics, from gentle leveling to aggressive limiting. By enabling the FAT mode, you can also add some extra harmonics and richness to your signal, making it sound more analog and less digital.


The plugin also offers a single-band or multi-band option, which gives you more control over the frequency spectrum of your signal. In single-band mode, you can use the shelf filters to boost or cut the bass and treble frequencies, giving your signal more body or brightness. In multi-band mode, you can process the bass and treble bands separately with different settings, allowing you to balance and shape your signal more precisely.


The plugin also compares favorably to other similar plugins on the market, such as Waves CLA-76, UAD LA-2A, FabFilter Pro-C 2, etc. While these plugins are also great choices for compression and limiting tasks, they may not offer the same level of warmth, saturation, and flexibility that PSPaudioware PSP Vintage Warmer 2 does. Moreover, PSPaudioware PSP Vintage Warmer 2 is more affordable than some of these plugins, making it a great value for money.


The performance of P audioware PSP Vintage Warmer 2 is also very good, as it has a low CPU usage and low latency processing that make it suitable for both offline and real-time applications. The plugin also supports VST, RTAS, AAX, and AU plugin formats on Windows and Mac OS X platforms, making it compatible with most DAWs and audio editors.


Conclusion




PSPaudioware PSP Vintage Warmer 2 is a high-quality digital simulation of an analog-style single or multi-band compressor/limiter that can add warmth, punch, and glue to your mixes. It combines rich, warm analog processing with a straightforward user interface and a comprehensive library of presets. It can also emulate the sound and behavior of classic analog compressors and limiters, such as the legendary Fairchild 670, UREI 1176, or Teletronix LA-2A. It also features a unique FAT mode that uses double sampling to achieve more accurate analog sounding processing.


The main strengths of PSPaudioware PSP Vintage Warmer 2 are its sound quality, versatility, flexibility, and affordability. It can handle different types of audio sources with ease and deliver satisfying results with minimal tweaking. It can also offer different types of compression characteristics, from gentle leveling to aggressive limiting. It also offers a single-band or multi-band option, which gives you more control over the frequency spectrum of your signal. Moreover, it is more affordable than some of its competitors, making it a great value for money.


The main weaknesses of PSPaudioware PSP Vintage Warmer 2 are its lack of advanced features, such as side-chain input, parallel compression, mid-side processing, etc. It also lacks some visual feedback, such as a gain reduction graph or a frequency spectrum analyzer. These features may not be essential for most users, but they may be useful for some advanced or professional users who want more control and precision over their compression and limiting tasks.


PSPaudioware PSP Vintage Warmer 2 is suitable for anyone who wants to add some warmth, punch, and glue to their mixes, whether they are beginners or experts, hobbyists or professionals. It is especially suitable for those who want to emulate the sound and behavior of classic analog compressors and limiters, such as the legendary Fairchild 670, UREI 1176, or Teletronix LA-2A. It is also suitable for those who want a simple and intuitive user interface and a comprehensive library of presets.


PSPaudioware PSP Vintage Warmer 2 is not suitable for those who want more advanced features, such as side-chain input, parallel compression, mid-side processing, etc. It is also not suitable for those who want more visual feedback, such as a gain reduction graph or a frequency spectrum analyzer. These features may not be necessary for most users, but they may be preferred by some advanced or professional users who want more control and precision over their compression and limiting tasks.


PSPaudioware PSP Vintage Warmer 2 costs $149 USD and can be bought from the official website of PSPaudioware or from any other authorized dealer. The plugin also comes with a free trial version that can be downloaded from the official website of PSPaudioware. The trial version has all the features of the full version but it expires after 14 days.


Some tips and tricks for getting the most out of PSPaudioware PSP Vintage Warmer 2 are:



  • Experiment with different settings and presets to find the best fit for your audio source.



  • Use the FAT mode for more accurate analog sounding processing.



  • Use the multi-band mode for more precise control over the bass and treble components of your signal.



  • Use the shelf filters in single-band mode to enhance or reduce the low-end and high-end of your signal.



  • Use the high frequency limiter to prevent clipping and distortion caused by excessive high frequencies.



  • Use the mix knob to blend the dry and wet signals for parallel compression effects.



  • Use the input and output meters to monitor the level and gain reduction of your signal.



FAQs




Here are some frequently asked questions about PSPaudioware PSP Vintage Warmer 2:


Q1: What is the difference between PSP VintageWarmer, PSP VintageWarmer LE, and PSP MicroWarmer?




A1: PSP VintageWarmer is the original version of the plugin that was released in 2001. It has a slightly different user interface and sound than PSP VintageWar mer 2. It is still available for purchase but it is not updated or supported anymore. PSP VintageWarmer LE is a light edition of PSP VintageWarmer that has fewer features and controls than the full version. It is only available as a bonus for some PSPaudioware products. PSP MicroWarmer is a simplified version of PSP VintageWarmer that has only one set of controls and no multi-band or FAT mode. It is also only available as a bonus for some PSPaudioware products.


Q2: How can I activate PSPaudioware PSP Vintage Warmer 2 with Keygen-ASSiGN?




A2: To activate PSPaudioware PSP Vintage Warmer 2 with Keygen-ASSiGN, you need to follow these steps:



  • Download the plugin installer from the official website of PSPaudioware or from any other trusted source.



  • Run the installer and follow the instructions on the screen to complete the installation process.



  • Run the Keygen-ASSiGN application and generate a serial number for PSPaudioware PSP Vintage Warmer 2.



  • Launch your DAW and load PSPaudioware PSP Vintage Warmer 2 as a plugin on any audio track or bus.



  • Enter the serial number generated by Keygen-ASSiGN when prompted by the plugin to activate it.



  • Enjoy using PSPaudioware PSP Vintage Warmer 2 for your audio production needs.



Q3: How can I update PSPaudioware PSP Vintage Warmer 2 to the latest version?




A3: To update PSPaudioware PSP Vintage Warmer 2 to the latest version, you need to follow these steps:



  • Visit the official website of PSPaudioware and log in to your user account.



  • Go to the downloads section and find the latest version of PSPaudioware PSP Vintage Warmer 2.



  • Download the update installer and run it on your computer.



  • Follow the instructions on the screen to complete the update process.



  • Restart your DAW and load PSPaudioware PSP Vintage Warmer 2 as a plugin on any audio track or bus.



Enjoy using the latest version of PSPaudioware PSP Vintage War


نبذة

Welcome to the group! You can connect with other members, ge...

Members

bottom of page